Steinberg Cubase SL 3, Operation Manual

Page: 30 / 54

CUBASE SX/SL
8 – 30 Radikal Technologies SAC-2K
Specifications
The SAC-2K can control 32 channels (8 channels at a time).
• Press the "17-24" and "25-32" buttons to switch from one set of
eight channels to the next.
• Use the "1-8" and "9-16" buttons to shift the fader assignment in
steps of one channel.
• Use the Select button above the master fader to disable/enable the
motors.
• Press the Mute/Solo button (the button on the far left) repeatedly to
cycle through the assignments for the Mute/Solo and Select buttons
of every channel.
The current assignments are indicated by the LED in the button:
• Use the From and To buttons to set the project cursor to the position
of the left or right locator.
Hold down Shift and press the From or To button to move the left or right locator to the
current project cursor position. If you hold down Shift and press the "<<" or ">>" but-
tons, the project cursor is set to the beginning or the end of the project
• Press the Store Marker button to create a marker at the project cursor
position.
Hold down Shift and press the Store Marker button to open the Marker window.
• Use the Recall Marker button to move the project cursor to the clos-
est marker to the right.
Hold down Shift and press the Recall Marker button to move the project cursor to the
closest marker to the left.
LED status Mute/Solo buttons Select buttons
Off Mute track. Select a single track for detailed settings.
On Solo track. Select a single track.
BlinkingControl the status of the
Write buttons in the
Cubase SX/SL mixer.
Control the status of the Read buttons in
the Cubase SX/SL mixer.