Steinberg Cubase SL 3, Operation Manual

Page: 9 / 54

CUBASE SX/SL
CM Automation Motor Mix 2 – 9
F2 button: Selected Channel mode EQ:
• Page 1 - Gain, Frequency, Q and Enable for the lo band, Gain, Frequency, Q
and Enable for the lo mid band
• Page 2 - Gain, Frequency, Q and Enable for the hi mid band, Gain, Fre-
quency, Q and Enable for the hi band
• Buttons below dials: bypass EQs
Holding down Shift and pressing the F2 button gives you a variation
of Selected Channel mode EQ:
• Page 1 - Gain and Frequency for all bands
• Page 2 - Q and Enable for all bands
• Buttons below dials: bypass EQs
F3 button: Selected Channel mode Sends
• Page 1 - Level, Enable, Pre/Post and Bus for Send 1 and Send 2
• Page 2 - Level, Enable, Pre/Post and Bus for Send 3 and Send 4
• Page 3 - Level, Enable, Pre/Post and Bus for Send 5 and Send 6
• Page 4 - Level, Enable, Pre/Post and Bus for Send 7 and Send 8
• Buttons below dials: bypass sends
Holding down Shift and pressing the F3 button gives you a variation
of Selected Channel mode Sends:
• Page 1 - Level for Send 1 to Send 8
• Page 2 - Enable for Send 1 to Send 8
• Page 3 - Pre/Post for Send 1 to Send 8
• Page 4 - Bus for Send 1 to Send 8
• Buttons below dials: bypass sends
For a description of the functionalities for the F4 button: Selected
Channel mode Inserts, Next button: Global mode Send Effects, Last
button: Global mode Master Effects, and Enter button: Global mode
Instruments, see the separate pdf document “Mackie Control and
Cubase SX/SL”.