Steinberg Cubase SL 3, Operation Manual

Page: 7 / 54

CUBASE SX/SL
CM Automation Motor Mix 2 – 7
• Press the Undo button to undo the last action in Cubase SX/SL.
Hold down Shift and press the Undo button to “undo the undo”.
In the Rotary section, use the Rotary dial to change the assignment of
the four buttons below the dial (indicated in the ROTARY display):
ROTARY: PA
• equaliz button: Fader Set mode Panning
• dynmics button: Fader Set mode Routing
• delay button: Selected Channel mode Panning
• special button: Selected Channel mode Routing
ROTARY: EQ
• equaliz button: Fader Set mode EQ Low (EQ1)
• dynmics button: Fader Set mode EQ Mid-Low (EQ2)
• delay button: Fader Set mode EQ Mid-High (EQ3)
• special button: Fader Set mode EQ High (EQ4)
ROTARY: S1
• equaliz button: Fader Set mode Send 1
• dynmics button: Fader Set mode Send 2
• delay button: Fader Set mode Send 3
• special button: Fader Set mode Send 4
ROTARY: S2
• equaliz button: Fader Set mode Send 5
• dynmics button: Fader Set mode Send 6
• delay button: Fader Set mode Send 7
• special button: Fader Set mode Send 8
• Use the Bank button in the View section for page up.
Hold down Shift and press the Bank Up button to jump to the last page.
• Use the Group button in the View section for page down.
Hold down Shift and press the Bank Down button to jump to the first page.
• Press the Rotary dial to switch the display of names of the available
parameters or the page name on or off.