EN
Myo Kinisi van Steeper, distributeur Loth Fabenim B.V.
Myo Kinisi Technical Manual
27
Removing the Hand Shell
18
Remove the retaining ring from the wrist of the inner hand shell.
Open the hand slightly and isolate the power supply.
With the hand firmly and carefully secured in a vertical position, begin to firmly
and carefully work the inner hand shell distally on the chassis.
Ensure the fingers are worked free from the palps throughout the process until
the hand shell can be lifted off.
Some gentle external heating of the inner hand shell can aid the process,
however extreme care must be taken not to heat the internal mechanism.
Do
not put the hand in the oven.
Note:
The inner hand shell should only be removed if the palps need replacing;
avoid removing the inner hand shell at any other point to protect the inner
mechanisms of the hand.
