Steeper Espire Elbow Pro & Hybrid Instruction Manual Download Page 66

Page: 66 / 68

Espire Elleboog Pro & Hybrid van Steeper Group, distributeur Loth Fabenim B.V.

Espire

Elleboog Pro & Hybrid Instruction Manual - For Prosthetists

Intended Use and Safety

Symbol

Definition

Source

Protection against solid foreign objects of

12.5 mm diameter and greater, and

protection against vertically falling water

drops when tilted up to 15 degrees.

IEC 60601-1, Table

D.3, Symbol 2

Bluetooth

wireless or enabled

technology.

Trademarks of

Bluetooth Special

Interest Group (SIG)

Complies with Australian Radio

communications requirements.

AS/NZS

4417.1:2012

Medical device manufacturer.

ISO 15223-1,

Clause 5.1.1

21 CFR Part 15

Meets FCC requirements per 21 CFR

Part 15.

Federal

Communications

Commission

Battery is recyclable - follow local

recycling & reclaiming procedures.

ISO 7000

Reference no. 1135

China RoHS Mark I logo. Product does not

contain toxic and hazardous substances or

elements above the clip level in any material

or application including those exempt from

the requirements of the EU RoHS Directive.

SJ/T11364-2006

Subject to recycling under the Waste

Disposal Act.

Environmental

Protection

Administration,

R.O.C.(Taiwan)

Note: Possible technical damage.

Info: Basic information regarding this

product.
Caution: Possible risk of accident or injury.

Warning: Possible risk of severe accident or

injury.
Indicates that this item is a medical device.

Summary of Contents for Espire Elbow Pro & Hybrid





































































Search results

Summary of Contents for Espire Elbow Pro & Hybrid

Reviews:

Steeper Espire Elbow Pro & Hybrid, Instruction Manual, Page: 66 / 68

Search results

Summary of Contents for Espire Elbow Pro & Hybrid

Reviews: