manualshive.com logo in svg

Steeper Espire Elbow Pro & Hybrid, Instruction Manual, Page: 51 / 68

Share
Download
Steeper Espire Elbow Pro & Hybrid Instruction Manual Download Page 51

EN

Espire Elleboog Pro & Hybrid van Steeper Group, distributeur Loth Fabenim B.V.

Espire

TM

 Elbow Pro & Hybrid Instruction Manual - For Prosthetists

51

Setting up the Counterbalance (Hybrid)

11

11.1   Counterbalance Overview

The counterbalance assists in flexion and extension of the Espire Elbow. Different 

amounts  of  tension  are  necessary  based  on  the  elbow’s  overall  length  and  the 

weight of the terminal device.

Note: The counterbalance mechanism is not removable or field-serviceable. Do not 

attempt to disassemble or modify the unit.

Adjustment Dial Location

The counterbalance dial can be installed on either the medial or lateral side of the 

elbow  and  should  be  specified  at  the  time  of  ordering.  Medial  placement  is  the 

typical location.

Counterbalance Dial

Note: Adjustments are easier to make when the forearm is flexed.

Caution: Be aware that if the adjustment dial is at maximum tension and the arm is 

raised to a horizontal level, the elbow could suddenly flex.

Caution: To prevent injury, users should ensure the elbow is in the maximum flexed 

position when donning or doffing.

Summary of Contents for Espire Elbow Pro & Hybrid





































































Reviews:

No comments