Steeper Espire Elbow Pro & Hybrid Instruction Manual Download Page 24

Page: 24 / 68

Espire Elleboog Pro & Hybrid van Steeper Group, distributeur Loth Fabenim B.V.

Espire

Elleboog Pro & Hybrid Instruction Manual - For Prosthetists

AC MYO Electrodes with TruSignal

Technology

4.2 Electrode Kits

An electrode kit consists of a wire harness with TruSignal boards attached, and a set

of metal electrodes. To order an electrode kit by part number, identify the number

of myo sites (1 site, 2 site, 4 site, 6 site), wire length (6 in, 12 in, 24 in), and dome size

(paediatric, medium, large).

TruSignal AC Electrode Kit Part Numbers

PART ID

MYO SITES

WIRE LENGTH

DOME SIZE

CP-TLE

1 / 2 / 4 / 6

06 / 12 / 24

P / M / L

Example Part Number:

CPE-TLE-212-M - TruSignal AC Electrode Kit, 2 Site, 12 in, Medium Dome

The remote metal electrodes

are Cavity-Backed™ for use

with the electrode kits and

snap onto the TruSignal

boards. They have a recess on

the back allowing the inner

socket material to deform into

this space, thus reducing the

bulge on the outer socket.

Socket Wall

O-Rings (2)

Remote Metal Electrodes

Summary of Contents for Espire Elbow Pro & Hybrid





































































Search results

Summary of Contents for Espire Elbow Pro & Hybrid

Reviews:

Steeper Espire Elbow Pro & Hybrid, Instruction Manual, Page: 24 / 68

Search results

Summary of Contents for Espire Elbow Pro & Hybrid

Reviews: