SM-WC-
LR Li’l Runner (HS)
Li’l Runner (HS) Operator’s Manual
8
23. Keep the torch cables away from the surface. Hang them to decrease the load
applied on the carriage. Use only cables whose weight is not more than 8 kg
(18 lbs) for horizontal work and 6 kg (13 lbs) for vertical work.
24. Do not work on curves with convex or concave radius less than 1000 mm (3.5 ft).
25. Use the HS version of the carriage in horizontal positions only.
26. At heights, use a fall arrester not to let the carriage fall.
27. Use eye protection (helmet, shield, and screen), ear protection, gloves, and pro-
tective clothing. Do not use loose clothing.
28.
Do not stop the carriage by hand. To stop, set the travel direction switch to ‘O’.
29. Do the maintenance only after you unplug the carriage from the power source.
30. Repair only in a service center appointed by the seller.
31. If the carriage falls, is wet, or has any damage, stop the work and promptly send
the carriage to the service center for check and repair.
32. Do not leave the carriage unattended during work.
33. If you are not going to use the carriage, remove it from the worksite and keep in a
safe and dry place.
Summary of Contents for Li'l Runner
