SM-WC-
LR Li’l Runner (HS)
Li’l Runner (HS) Operator’s Manual
31
5.10. Flexible trackway set
Allows the carriage to move on a flexible rail that is clamped to planes, pipes, or
tanks. A single flexible rail is 1.88 m (6.1 ft) long, and its minimum curve radius is
1.25 m (4.1 ft). In all work positions, clamp each rail to the surface by using nine
narrow magnetic units or at least five magnetic/vacuum units.
Before use, remove the anti-corrosion material from the rail.
Connect two rails with the 3 mm hex wrench (
1, 2
). Use the 4 mm hex wrench to
remove the standard guide arms and install the guide arms of the set (
3
). Remove
the sleeve from the long rod (
4
) and install the rod into the carriage. Next, install the
torch holder into the rod (
5
) and move the rollers outward (
6
,
7
,
8
). Then, put the
carriage onto the rail and set the rollers as before.
Flexible rail (1 unit):
PRW-0466-71-00-00-0
Guide arms (2 units):
ZST-0466-69-00-00-0
Long rod (1 unit):
WLK-0466-04-10-00-0
Summary of Contents for Li'l Runner
