ABM-28
ABM-
28 Operator’s Manual
6
1.4. Equipment included
The ABM-28 is supplied including the following elements.
Carriage installed on a guide track
1 unit
Wooden box
1 unit
Additional guide track
1 unit
Clamp for 10
–35 mm (0.39–1.38’’) plates
2 units
Track clamp for 10
–35 mm (0.39–1.38’’) plates 3 units
Milling unit support for beveling 10
–35 mm
(0.39
–1.38’’) plates at 60° to –60°
1 unit
Milling unit (includes milling head with
7 cutting inserts)
1 unit
Chip container
1 unit
Tool container
1 unit
4 mm hex wrench
1 unit
5 mm hex wrench
1 unit
6 mm hex wrench
1 unit
8 mm hex wrench
1 unit
13/17 mm flat wrench
1 unit
T15P torx screwdriver
1 unit
Nut, spring washer, and round washer
for installing the milling unit support
2 sets
Grease for screws
1 unit
Operator’s Manual
1 unit