3/8’’ ELECTRIC DRILL
3
10.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing and gloves away from moving parts
. Loose clothes, jewelry or
long hair can be caught in moving parts.
11.
.Avoid accidental starting.
Be sure switch is off before plugging in. Carrying tools
with your finger on the switch or plugging in tools that have the switch on invites
accidents.
12.
Remove adjusting keys or switches before turning the tool on
. A wrench or a key
that is left attached to a rotating part of the tool may result in personal injury.
13.
Do not overreach
. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the tool in unexpected situations.
14.
Use safety equipment.
Always wear eye protection. Dust mask, non-skid safety shoes,
hardhat or hearing protection must be used for appropriate conditions.
Tool Use and Care
15
.Use clamps or other practical way to secure and support the work piece to a stable
platform.
Holding the work by hand or against your body is unstable and may to loss of
control.
16
.Do not force tool
. Use the correct tool for your application. The correct tool will do the
job better and safer at the rate for which it is designed.
17
.Do not use tool if switch does not turn on or off.
Any tool that cannot be controlled
with the switch is dangerous and must be replaced.
18.
Disconnect the plug from the power source before making any adjustment,
changing accessories or storing the tool
.
Such preventative safety measures reduce
the risk of starting the tool accidentally.
19.
Store idle tools out of reach of children and other untrained persons.
Tools are
dangerous in the hands of untrained users.
20.
Maintain tools with care.
Keep cutting tools sharp and clean.
Properly maintained tools,
with sharp edges are less likely to bind and are easier to control.
21.
Check for misalignment or binding of moving parts, breakage of parts and
any other condition that affect the tools operation.
If damaged, have the tool
serviced before using. Poorly maintained tools cause many accidents.
SPECIFIC SAFETY RULES
Hold tool by insulated gripping surfaces when performing an operation where the Drill may
contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the
tool "live" and shock the operator.
Summary of Contents for SP-PT235
Page 1: ......
