3/8’’ ELECTRIC DRILL
5
Extension Cords
1
.
Make sure your extension cord is in good condition. When using an extension cord, be
sure to use one heavy enough to carry the current your product will draw. An
undersized cord will cause a drop in line voltage resulting in loss of power and
overheating. Table 1 shows the Correct size to use depending on cord length and
nameplate Ampere rating. If in doubt, use the next heaver gage. The smaller the gage
number is, the heavier the cord is.
2. Outdoors Use Extension Cords. When tool is used outdoors, use only extension cords
intended for use outdoors and so marke
d.
3.Use only UL listed extension cords. Inspect extension cord before use and never use
damaged or altered extension cords. Follow extension cord manufacturer safety
instruction
Minimum Recommended Extension Cord Gauge (AWG) Chart (Table 1)
TABLE 1
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120
VOLT)
NAMEPLATE
AMPERES
(At Full Load)
EXTENSION CORD LENGTH
25FEET
FEET
50FEET
FEETFE
ET
75FEET
FEET
100 FEET
150 FEET
0-2.0
18
18
18
18
16
2.1-3.4
18
18
18
16
14
3.5-5.0
18
18
16
14
12
5.1-7.0
18
16
14
12
12
7.1-12.0
16
14
12
10
.
12.1-16.0
14
12
10
-
-
16.1-20.0
12
10
-
-
-
*Based on limiting the line voltage drop to five volts at 150% of the rated
amperes.
DANGER:
Failure to connect this tool to a properly grounded outlet can result in DAMAGE, FIRE,
ELECTRIC SHOCK or FATAL INJURY. Consult a qualified electrician if you are in
doubt as to weather the outlet is properly grounded. Do not modify the plug provided
with the product - if it will not fit the outlet; have a proper outlet installed by a
qualified electrician. Do not use any type of adapter with this product.
FUNCTIONAL DESCRIPTION (Fig.1)
1.
Grip
2.
Variable Speed Trigger
3.
Lock On Button
4.
Forward/Reverse Lever
5.
Keyless Chuck
Figure 1
Summary of Contents for SP-PT235
Page 1: ......
