Page 2 of 12
939599284 Rev D
3b
3a
2
SCREW
3c
1/2" DRILL BIT
EXTRUSION
SLOT
T-NUT
ADAPTOR PLATE
Rail Mount Kit
Compatibility:
•FrameOne
•c:scape Beam
•c:scape back to back
desk (bench)
•c:scape desk
Frame One
1.
Determine location of
RoomWizard II.
2.
Insert two (2) screws
through holes in adaptor
plate and into T-nuts.
Loosely tighten.
3.
Place adaptor plate
onto extrusion making sure
T-nuts fit into slots (3a)
and mark hole with pencil
(3b). Remove adaptor
plate and drill a 1/2" hole
into extrusion (FrameOne
or c:scape beam) for
power over ethernet cable
(3c).
4.
Place adaptor plate
back onto extrusion,
making sure T-nuts fit into
slots and tighten onto
extrusion.
T-NUT
(PLACEMENT STATE)
4
T-NUT
(INSTALLED STATE)
