Media Cabinet Assembly
1.
Place unit on a clean surface with front facing up.
2.
Remove both shipping brackets from the bottom of the
cabinet.
3.
(Requires two people) Align and place unit on top of
Base Frame.
4.
From under the base frame, install the clamp brackets
with fasteners, making sure each bracket is fully engaged
with the frame and tighten securely. For best results,
fasteners should be tightened to 180 in/lbs. or 15 ft/lbs.
5.
Secure monitor mounting bracket (small or large) to the
back panel with four (4) fasteners provided (holes are
pre-drilled).
6.
A 1-7/8” dia. hole must be drilled for monitor
power cord routing. A cord drop grommet is
supplied to insert into this hole.
7.
Install back panel (if applicable) by
inserting top brackets into slots in the cabinet
top panel, then pushing bottom into place.
Secure with 1/4-20 screws through
clearance holes in the base.
2
5
SMALL MONITOR BRACKET
LARGE MONITOR BRACKET
3
4
4
7
6
1-7/8”
BACK PANEL
GROMMET
(SUPPLIED)
OR
CLAMP BRACKET
(ENLARGED)
5
®
HEALTH
Page 10 of 13
Doc # 135357
939599300 Rev C
