Operating and adjusting
_______________________________________________________________
16
156631
Switching the display between centimetres
and inches
A selection can be made to have the height displayed
in centimetres [cm] or inches [inch]. This selection
does not affect the actual height of the desk.
To change the unit displayed, proceed according to
the information in the table below:
Press the position memory
button
MEM1
and the
REM
button at the same
time
The display switches from
CM to INCH and back
Resetting to factory settings
Press the position
memory buttons
MEM1
,
MEM2
and the
REM
but-
ton at the same time
The system resets to the
factory settings.
Setting the displayed desk height
Press the position
memory buttons
MEM1
,
MEM2
and the
REM
but-
ton simultaneously for 4
seconds.
The display shows
"
ADJUST HEIGHT
" and
the current value of the
desk height.
Move the toggle switch
up or down to correct the
displayed desk height.
The set height starts
flashing and the blue light
bar fills up.
Please note
: The desk-
top does not move during
this process.
EN
