Page 14
STOCK FEEDER HEIGHT
ADJUSTMENT
Position the stock feeder height so that the distance
between the table and the feed rollers is approximately
1/8’’ less than the thickness of the workpiece.
Fig. 19
.
Fig. 19
DIGITAL CONTROL PANEL
STOCK FEEDER ROLLER
ALIGNMENT
Position the stock feeder so that all of the rollers make
contact with and set squarely on the workpiece.
Fig. 20
Fig. 20
1. Power / speed
Adjustment Dial
3. Feeding Direction Button
2. Speed Setting Button
4. Feeding Direction Button
1. Speed
adjustment
Speed range 2 – 22 M/min
(7 – 72 FPM).Press to switch on
power and pause while in
motion.
2. Setting
button
Speed setting: press SET
button and dial to desired speed.
3.
4.
Feeding
direction
button
Change feed direction during
operation: Press Feeding direction
button 2 times, reverse direction
will be set in lowest speed.
Retrieve original Feed setting:
Press Power dial 2 times.
