1. Install column to base.
2. Install table assembly.
3. Install table adjustment handle.
7
ASSEMBLY
4. Install head assembly.
7. Install the chuck.
5. Install feed handles.
6. Install the handwheel, tighten the
set screw.
Carefully lift the head above
the column and slide it onto the
column. Make sure the head
slides down the column as far
as possible. Align the head with
the base.
Using the hex wrench, tighten
the head lock set screws.
3XVKWKHDUERURQWRWKHVSLQGOH
(SEE FIG.1)
.
3XVKWKHFKXFNRQWRWKHDUERU
(SEE FIG.2).
8VLQJDZRRGPDOOHWILUPO\WDSWKHFKXFNXSZDUGLQWRSRVLWLRQRQWKHVSLQGOHVKDIW
(SEE FIG.2)
.
Before any assembly of the chuck and arbor to the drill press head, clean all matting surfaces with a
non-petroleum based product, such as alcohol or lacquer thinner. Any oil or grease used in the packing of these parts must
be removed; otherwise the chuck may come loose during operation.
WARNING:
Fig.2
Fig.1
