Improper connection of equipment-grounding conductor can result in the risk of an electrical shock.
Equipment should be grounded while in use to protect user from an electrical shock.
This tool MUST be grounded while in use to protect the operator from electrical shock.
WARNING:
WARNING:
IN THE EVENT OF A MALFUNCTION OR BREAKDOWN,
grounding provides a path of least resistance for electric currents and
reduces the risk of an electric shock. This tool is equipped with an electric cord that has an equipment-grounding conductor and a
grounding plug. The plug
MUST
be plugged into a matching receptacle that is properly installed and grounded in accordance with
ALL
local codes and ordinances.
DO NOT MODIFY THE PLUG PROVIDED.
If it will not fit the receptacle, have the proper receptacle installed by a qualified electrician.
IMPROPER CONNECTION
of the equipment-grounding conductor can result in a risk of an electric shock. The conductor with green
insulation (with or without yellow stripes) is the equipment-grounding conductor. If repair or replacement of an electric cord or plug is
necessary,
DO NOT
connect the equipment-grounding conductor to a live terminal.
CHECK
with a qualified electrician or service person if you do not completely understand the grounding instructions, or if you are not
sure the tool is properly grounded.
USE PROPER EXTENSION CORD.
Make sure your extension cord is in good condition. When using an extension cord, be sure to use
one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of
power and overheating.
BE SURE YOUR EXTENSION CORD IS PROPERLY WIRED
and in good condition. Always replace a damaged extension cord or have
it repaired by a qualified person before using it. Protect your extension cords from sharp objects, excessive heat and damp or wet areas.
Check with a qualified electrician if you do not understand grounding instructions or if you are in doubt as to whether the tool is
properly grounded.
This tool is equipped with an approved cord and a 3-prong grounding type plug for your protection against shock hazards.
Grounding plug should be plugged directly into a properly installed and grounded 3-type receptacle, as above.
DO NOT REMOVE
or alter the grounding prong in any manner. In the event of a malfunction or breakdown, grounding provides a path
of least resistance for electrical shock.
This machine is for indoor use only. DO NOT expose to rain or use in damp locations.
WARNING:
GROUNDING INSTRUCTIONS
5
GUIDELINES FOR EXTENSION CORDS
ACCESSORIES AND ATTACHMENTS
RECOMMENDED ACCESSORIES
To avoid injury:
WARNING:
USE ONLY
accessories recommended for this drill press.
)2//2:
instructions that accompany accessories. Use of improper accessories may cause hazards.
86(21/<
accessories designed for this drill press to avoid injury from thrown broken parts or workpieces.
'2127
use any accessory unless you have completely read the instruction or user manual for that accessory.
ELECTRICAL REQUIREMENTS
POWER SUPPLY AND MOTOR SPECIFICATIONS
To avoid electrical hazards, fire hazards, or damage to the tool, use proper circuit protection. Use a separate
electrical circuit for your tools. To avoid shock or fire, if power cord is worn or cut or damaged in any way, have it replaced
immediately.
WARNING: