Steel City 20-400, Owner'S Manual

Page: 9 / 22

Page 9
Make sure the switch is in the off position and
the machine is unplugged.
◊ desAsseMBLing THe BLAde
1. Unlock each of the protective covers and loosen the
clamping handles.
2. Remove the tension on the blade by raising the
eccentric lever upward.
3. Remove the blade by passing it through the left and right
guard and taking care to avoid contact of the blade teeth
with the metal.
2. Place the table on the trunnions taking care to insert the
threaded rods of the table into the holes in the trunnions.
Trunnions
Passage
holes
Threaded
rods
3. Screw a handle nut onto each of the threaded rods now
protruding from the trunnions.
◊ TABLe
1. Remove the bolt located on the rear compass of the
machine frame.
4. Under the table is already fixed an L-shaped angle with
a passage hole.
Bolt to be
removed
AsseMBLY
wArning
!