O P E R A T I O N & S E R V I C E
Multicolor status LED:
Normal operation
LED color and state
steamOres state Description
White (full ON)
Stand by
SteamOres is disabled
(On/Off button is Off)
Lime/green (full ON)
Ready
SteamOres is ready to produce steam
(waiting for signal demand)
Blue (Intensity as % demand)
Steam ON
SteamOres is heating element.
Yellow (full ON)
Drain cycle
Drain pump is ON
Purple (full ON)
Adding water Fill valve is ON
Alarms
In case of alarm the multi-color LED will flash red + one of the following color
LED color and state
Alarm state
Description
Orange (Flashing with Red)
Service due
Service is due
Blue (flashing with red)
Water level
Water level sensor is defective
Dark grey (flashing with Red)
Water temp.
Water temperature sensor is defective
Purple (flashing with Red)
Water feed
Humidifier is unable to fill the cylinder
Yellow (flashing with Red)
Drain pump
Humidifier is unable to drain cylinder
In case of other alarms, multi-color LED will turn Red (Full ON)
Other modes
LED color and state
steamOres state Description
Orange (full ON)
Drain for Service Drain for service is in progress
Deep pink (full ON)
Factory mode SteamOres is in Factory mode for
configuration or calibration
Midnight blue (full ON)
Anti freeze
Heating element is powered, to avoid
freezing
Indigo (full ON)
Pre-heat
Heating element is powered, water will
not boil
24
section
6
Summary of Contents for RES Series
Page 28: ......