13
Your device has four wheels for ease of transport. Grasp the pole and pull
gently to move the device.
You can also lift up the device in order to move it, again holding the device
at the base of the pole.
To maintain maximum performance, your steamer must be descaled occa
-
sionally. The time between descaling operations depends on the quality of
the water and the frequency with which you use the appliance. On average,
the appliance must be descaled after 30 hours of use.
-
-
-
Maintenance
It’s preferable to use distilled or demineralized water to
reduce scaling.
Never touch the steam head until it has cooled down
completely.
Always make sure the pole is firmly attached to the base
unit before lifting up the device (see assembly
instructions).
After use
Transport
After using the garment steamer, switch the power off. The power indicator
light will go off, and you can then unplug the device.
Wrap the cord around the power cord storage area under the base of the
steamer
Always empty the water tank before storage
Do not carry the steamer by the water tank handle, this will only remove
the tank and the unit will fall to the floor
Hang the steam head in an upright position on the hook when not in use.
(fig.1)
-
-
-
-
-
Summary of Contents for UNILYS
Page 21: ......
