U
SING THE
P
ORTABLE
P
OWER
S
TEAM
C
LEANER
11
Top Innovations
FILLING BOILER WITH WATER
1.
Place
Portable Power Steam Cleaner
on a flat, level surface.
2.
Make sure power cord is not plugged into an electrical outlet.
3.
Cautiously unscrew Boiler Cap by rotating it in a counter-
clockwise direction, and remove from unit to expose Boiler Fill
Hole.
4.
Boiler should always be emptied after each use. If it was not
emptied after the last use, empty it now. This will make it
easier to fill with the correct amount of water.
5.
Fill included Measuring Cup to 16 oz. (473 ml.) fill line with
water.
NOTE: To prolong the lifetime of your
Portable Power
Steam Cleaner
, it is highly recommended that distilled or
de-mineralized water be used in unit.
6.
Carefully pour water from Measuring Cup into Boiler through
Boiler Fill Hole.
WARNING: Extreme caution should be used when pouring
water into the Boiler. Do not look directly down into Boiler
Fill Hole when filling. Keep your free hand and any
children or pets at a safe distance.
7.
If desired, refill Measuring Cup to 16 oz. (473 ml.) fill line with
water, and pour second cupful into Boiler.
NOTE: Do not exceed the Boiler’s maximum capacity of
33 oz. (976 ml.).
8.
Replace Boiler Cap, rotating it in a clockwise direction and
ensuring that it is screwed on tightly to prevent hot steam from
escaping and causing injury (FIGURE 7-B).
REFILLING BOILER AFTER USE
If unit has been in use, always follow these safety precautions below before removing
Boiler Cap:
1.
Allow unit to cool for 5-10 minutes.
2.
Press and hold Steam Trigger to release all remaining steam.
WARNING: Failure to follow these precautions may result in burns from escaping steam
when the Boiler Cap is removed.
FIGURE 7
B
A
