6
Top Innovations
P
RODUCT
I
NFORMATION
•
The
Boiler Cap
(1) securely covers the
Boiler Fill Hole
, preventing hot steam from escaping the
Boiler
. The
Boiler Cap
must be unscrewed and removed (only when the
Boiler
is cooled) in order
to fill the
Boiler
with water.
•
The
Boiler Fill Hole
(1
A
) is the opening through which water is poured into the
Boiler
.
•
The
Boiler
(1
B
) is the internal heating chamber where water is converted into steam. Some empty
space inside the
Boiler
is required for this conversion process, so the recommended maximum
water capacity should not be exceeded when filling with water.
•
The
Heating Indicator Light
(2) illuminates to indicate that the unit is powered on and is heating,
then deactivates when the unit is ready to begin steaming.
•
The
Strap Tabs
(3) serve as the connection points for hooking the
Shoulder Strap
onto the unit.
•
The
Main Steam Nozzle
(4) releases a flow of hot, penetrating steam when the
Steam Trigger
is
pressed. The
Jet Nozzle
and
Extension Wands
connect directly to the
Main Steam Nozzle
.
•
The
Steam Trigger
(5) controls the flow of steam from the
Main Steam Nozzle
. For a continuous
flow of steam, the
Trigger
can either be held down manually or locked down with the
Steam Lock
Switch
.
CAUTION: Do not direct steam towards surfaces that may be damaged by moisture
or extreme heat.
•
The
Steam Lock Switch
(5
A
) locks down the
Steam Trigger
for a continuous flow of steam.
•
The
Steam Hose
(6) directs steam from the
Boiler
to the
Main Steam Nozzle
, and is designed to
remain flexible while safely containing the steam.
•
The
Extension Wands
(7) connect to the
Main Steam Nozzle
, allowing easy cleaning of floors,
ceilings and other hard-to-reach places.
•
The
Utility Head
(8) connects to the
Jet Nozzle
and is designed for cleaning floors and other large
surfaces. The
Utility Head
includes three modes of operation: brush, squeegee, and neutral (flat).
Refer to Page 8 for details.
•
The
Cloth Cover
(9) attaches to the
Utility Head
for cleaning tile, hardwood and other hard surface
floors while minimizing any potential heat and moisture damage.
•
The
Shoulder Strap
(10) hooks onto the two
Strap Tabs
, allowing the unit to be conveniently toted
hands-free while cleaning.
•
The
Jet Nozzle
(11) connects to either the
Main Steam Nozzle
or the
Extension Wands
, and is
designed to safely focus the flow of steam. The
Utility Head
,
Brushes
and
Nozzle Tip
all connect
to the
Jet Nozzle
.
•
The
Nylon Brush
(12) connects to the
Jet Nozzle
and is designed to work with steam to remove
stubborn stains and grime. It is intended for use on tile, grout, carpet, upholstery, and any other
surface that will not be scratched or damaged by the nylon bristles.
•
The
Brass Brush
(13) connects to the
Jet Nozzle
and is designed to work with steam to remove
stubborn stains and grime. It is intended for use on BBQ grills, oven racks, automobile engines &
wheels, shop tools and other hard metal surfaces
NOTE: Some delicate surfaces, such as stainless steel, may be scratched or damaged by the
brass bristles. Use careful judgement when deciding what surface to clean with the
Brass
Brush
. If you are unsure if a surface will be damaged, it is recommended that you test a
small inconspicuous spot before proceeding.
•
The
Nozzle Tip
(14) connects to the
Jet Nozzle
and is designed to finely focus the flow of steam.
It is recommended to always use the
Nozzle Tip
when not using either of the
Brushes
or the
Utility
Head
with the
Jet Nozzle
.
•
The
Measuring Cup
(15) holds 16 oz. (500 ml.) of water, and is provided to assist in easily and
consistently filling the
Boiler
with the optimum amount of water (33 oz. / 976 ml.).
