Steamfast MODEL SF-140 User Manual Download Page 11

Page: 11 / 16

sIng

the

team

Top Innovations

FLOOR SURFACES

Below is a listing of some of the most common floor surfaces that the

Steam Mop

is ideal for

cleaning. If you have a question about a floor surface that isn’t listed below, please contact our

Customer Service Department:

[email protected]

(800) 711-6617

(816) 584-9700

, ext.

130

131.

The

Steam Mop

is perfect for these hard floor surfaces:

•

Sealed Hardwood

•

Sealed Laminate

•

Linoleum

•

Ceramic

•

Granite

•

Marble

•

Slate

•

Tile

IMPORTANT: Use of the

Steam Mop

on unsealed

hard floor surfaces is not recommended.

Surfaces such as hardwood that are not properly sealed may be warped or damaged by

exposure to heat and moisture.
Care should also be taken when steaming sealed

hardwood floors, as prolonged exposure to

steam in a single spot may cause damage and discoloration. To avoid this, keep the

Steam Mop

in constant motion on these surfaces, and place it back on Resting Pad when idle.

NOTE: Extremely rough textured floors may tear or damage Microfiber Cloths.

Summary of Contents for MODEL SF-140

















Search results

Summary of Contents for MODEL SF-140

Reviews:

Related manuals for MODEL SF-140

Brands by name

Popular brands

Steamfast MODEL SF-140, User Manual

Search results

Summary of Contents for MODEL SF-140

Reviews:

Related manuals for MODEL SF-140

Brands by name

Popular brands