background image

C

ustomer

 s

uPPort

 / 

P

roduCt

 s

PeCIfICatIons

14

Top Innovations

CUSTOMER SUPPORT

For problems with your 

Steam Mop

, please refer to the troubleshooting guide located on Page 13 

of this manual.  Additional inquiries should be directed to our customer support services through 

our Web site, 

www.steamfast.com

, on the 

Contact Us

 Web page.

If you do not have internet access, you may also contact our Customer Service Department by 

telephone, at 

(800) 711-6617

 or 

(816) 584-9700

, ext. 

130

 or 

131

.

NOTE: In order for our Customer Service representatives to help you as quickly and 

efficiently as possible, please have the following information ready before calling:

    

    • Purchase information (where and when you purchased this product)

    • Copy of purchase receipt / proof of purchase

    • Product serial number

For your convenience, space has been provided below for you to record the serial number of 

your unit (located on the back or bottom of the unit) for easy reference when contacting our 

Customer Service Department.

____________________–________________________________________________________

PRODUCT SPECIFICATIONS

MODEL: 

SF-140

VOLTAGE:

 120V

WATTAGE:

 1000W

AMPERAGE:

 8.3A

WATER CAPACITY:

 10 OZ. (300 ML.)

HEATING TIME:

 3 MIN. (APPROXIMATE)

CONTINUOUS STEAM TIME:

 12 MIN. (APPROXIMATE)

POWER CORD LENGTH:

 19.0’ (575.0 CM.)

 

Summary of Contents for MODEL SF-140

















Reviews: