Stealth JAP230, User Manual

Page: 6 / 10

H o w to use
P O W E R
After connecting the power supply,
touch the "Power" button, and the
m achine defaults to automatic mode at initial startup. After running for 5
seconds, the machine runs normally, the digital tube displays the current
air quality index, and the air quality indicator shows the current air quality.
A U T O M O D E
In the startup state, touch the "Auto" button, the m achine enters the
automatic mode, the wind speed is automatically adjusted according to
the current opening quality, and the automatic gear wind speed is up to
3 gears.
A QI Light Blue
0~75
Orange
76~150
Red
150 P M2.5(
μ
g/m³)
M A N U A L M O D E
In the startup state, touch the "Speed" button and the machine will enter
the state of manually adjusting the wind speed. The user can adjust the
wind speed according to needs, and switch the wind speed before the
fi
rst,
second and third gears.
S L E E P M O D E
In the startup state, touch the "Sleep" button, the machine enters sleep
m ode. Except for the sleep indicator, the other indicators are all off. Press
the "sleep" button again or press other mode buttons to exit the sleep state.
T U R B O M O D E
In the startup state, touch the "Turbo" button, the machine enters the turbo
m ode. The machine operates at the highest speed.
TI M E R
In the startup state, touch the "timing" button, and the machine will turn on
the timing shutdown function. The digital tube displays the timing tim e, the
setting range is: 1~8 hours. After the timing setting is successful, the digital
tube restores P M2.5 display, and then the digital tube displays the current
remaining time every 1 hour until the countdown ends.
Cancel timing function: After the setting is successful, the timing indicator
light will be on for a long time. If you need to cancel the timing function, you
can press and hold the timer button for 3 seconds, and the indicator light
will go out to cancel the timing function.
· 7 ·