Stealth JAP230, User Manual

Page: 9 / 10

Tr o u bles h o otin g
QUESTION POSSIBLE SOLUTIONS
You ignored the reminder to replace the
fi
lter. When the
fi
lter indicator starts
fl
ashing,
you do not timely replace the
fi
lter; You must replace the
fi
lter and press the reset
button for 5 seconds. After the reset, the indicator will go out, and then the product
can be started normally.
Product failed to start
There's no air coming
out of the vent
The product is not plugged in. Please plug into the power socket and turn on the
product.
So me kind of fi lter may not be inside the product. M ake sure the fi lters are installed
in the correct sequence The product has been
running for a long time
and the air quality has
not improved signi
fi
cantly
Indoor humidity is too high, because this formed condensation 7 green do not put
the product in the place of high humidity such as: bathroom, toilet
Obstacles around the product affect the puri
fi
cation effect.
The room where the product is located is too large.
Excessive product noise
Before running, make sure the strainer has been removed from the packing bag.
Every time it is powered on, the product runs in intelligent puri fi cation mode by default,
and the puri
fi
cation speed is automatically adjusted by the machine according to indoor
air quality. If you want to adjust the running state at will, please press manual mode to exit
the intelligent mode.
The puri fi cation speed
cannot be adjusted after
power supply
It may be the child lock function that locks the product. Please press the button of the
child lock for 3 seconds, the indicator will go out, and the child lock function will be
cancelled, and you can do what you want.
W hen running, the keys
do not respond
The air is dirty, but the air
quality is good
Please con fi rm whether it is a dif fi cult place for inhalation of pollutants.
It is dif fi cult to remove dirt
from the air
Is the dust fi lter dirty? If there is still no improvement after maintenance, please
replace the
fi
lter.
The air
fl
ow in the outlet
is signi fi cantly reduced
High density fi lter screen is dirty, please clean the fi lter screen, see the maintenance
method.
Is it used where the smell is strong? If use under strong smell such as cigarette and
roast meat, the inner net can produce odor for several weeks or days, please replace
the
fi
lter, and always keep the ventilation.
The wind from the air
outlet smells bad
I have changed the
fi
lter,
why is it still not on
M aybe you didn't press the reset button. Long press the reset button for 5 seconds.
After the reset, the indicator will go out, and then start the air puri
fi
er normally.
· 10 ·