![background image](http://html1.mh-extra.com/html/stealth/9011h/9011h_operators-manual_1368250017.webp)
STEALTH DIGI-TIG 180 DC PULSE PFC MV
Important!
Only selectable when ‘pulse key’ has been pressed
Fp
Pulse frequency
Unit
Hz
Setting range 0.5-200
Factory setting
Important! Only selectable when ‘pulse key’ has been pressed
Tdown
Downslope time
Unit
S
Setting range 0-10
Factory setting
Ic
Crater arc current (only with 4T)
Unit
S
Setting range 5-100% of main current Iw
Factory setting
Tpo
Gas post-flow time
Unit
S
Setting range 0-10
Factory setting
(3) Rod electrode (MMA) welding parameter
(4) Power/Alarm indicator
(5) Welding current and other parameter displays
Before starting welding indicate the open-circuit voltage by pushing the
encoder for 3 seconds and the display shows the pre-set value of Tpr, Is, Tup,
Iw, Dcy, Iw, Fp, Ib, Tdown, Ic, Tpo. After the start of welding, display shows
the present actual value of the welding current.
MAINTENANCE AND TROUBLESHOOTING
16
Important!
Only selectable when “pulse key” has been pressed.
Fp Pulse frequency
Unit Hz
Setting range 0.5
—
200
Factory setting
Important!
Only selectable when “pulse key” has been pressed.
Tdown Downslope time
Unit S
Setting range 0
—
10
Factory setting
Ic Crater arc current (only with 4T)
Unit S
Setting range 5
—
100% of main current Iw
;
Factory setting
Tpo Gas post-flow time
Unit S
Setting range 0
—
10
Factory setting
(3) Rod electrode(MMA) welding parameter
Parameter Setting range
Arc force
0-10
Hot start
0-10
(4) Power/Alarm indicator
Light up if the welder overheat.
(5) Welding current and other parameter display
Before start of welding Indicate the open-circuit voltage when you push the enconder for 3s and the
display shows the pre-set value of Tpr ,Is ,Tup,Iw,Dcy,Iw,Fp,Ib,Tdown,Ic,Tpo . After the start of
welding, display shows the present actual value of the welding current.
MAINTENANCE AND TROUBLESHOOTING
16
Important!
Only selectable when “pulse key” has been pressed.
Fp Pulse frequency
Unit Hz
Setting range 0.5
—
200
Factory setting
Important!
Only selectable when “pulse key” has been pressed.
Tdown Downslope time
Unit S
Setting range 0
—
10
Factory setting
Ic Crater arc current (only with 4T)
Unit S
Setting range 5
—
100% of main current Iw
;
Factory setting
Tpo Gas post-flow time
Unit S
Setting range 0
—
10
Factory setting
(3) Rod electrode(MMA) welding parameter
Parameter Setting range
Arc force
0-10
Hot start
0-10
(4) Power/Alarm indicator
Light up if the welder overheat.
(5) Welding current and other parameter display
Before start of welding Indicate the open-circuit voltage when you push the enconder for 3s and the
display shows the pre-set value of Tpr ,Is ,Tup,Iw,Dcy,Iw,Fp,Ib,Tdown,Ic,Tpo . After the start of
welding, display shows the present actual value of the welding current.
Parameter
Setting range
Arc force
0-10
Hot start
0-10
Lights up if the machine overheats
17