STEALTH DIGI-TIG 180 DC PULSE PFC MV
4 OPERATION
4.1 Machine Controls
MAINTENANCE AND TROUBLESHOOTING
13
§4 Operation
§4.1 Layout for the panel
1
Positive output:
The welder’s positive polarity output.
2
Negative output:
The welder’s negative polarity output.
3
Aero socket:
Is connected to torch switch control wire.
（
It has 14 leads and lead 8 - lead 9 are
connected to torch switch control wire
）
.
4
Shield gas connector:
Is connected to the gas input pipe of torch.
5
Power source switch:
Switch to “ON”, the welder is turned on, while switch to “OFF”, the
welder is turned off.
6
Power source input:
To connect power source.
7
Shield gas input joint:
To connect one head of the gas hose while the other head of which is
connected to argon gas cylinder.
1 Positive output: Welder’s positive polarity output
2 Negative output: Welder’s negative polarity output.
3 Aero socket: Connected to torch switch control wire (has 14 leads with 8-9
connected to torch switch control wire).
4 Shield gas connector: Connected to torch gas input pipe.
5 Power source switch: Switch to ‘ON’ – welder is turned on. Switch to ‘OFF’ –
welder is turned off.
6 Power source input: Connects power source.
7 Shield gas input joint: Connects one head of the gas hose while the other is
connected to argon gas cylinder.
14