Software Configuration
12.0
17
mo-Vis Configurator Parameter Settings
12.1
The mo-Vis Configurator Software allows users to change the parameters of the
Micro Joystick
,
depending on the level of profile assigned.
MOUNTING SETTINGS (DEALER LEVEL)
DEADBAND SETTINGS
(
Note:
Most wheelchair electronics have their own default deadband setting. It is recommended to keep
the deadband at its default in the mo-Vis Configurator.)
TILT
The
Multi Joystick
unit is able to detect tilt (in reference to the gravitation of Earth). The wheelchair
will stop driving when the
Enable
parameter is set to
On
and the joystick is tilted more than 70° in any
direction. The joystick becomes active again if the angle of tilt falls below 60°. The use of this
functionality makes sense when a mo-Vis joystick is integrated into a tray or other tilting surface or
mounting aid.
(
Note:
the default setting for the tilt sensor is Off.)
Setting
Description
Parameters
Mounting
Direction
Changes the joystick axis in
90-degree increments clockwise,
providing compensation for
joystick rotation.
Default:
0°
Min.:
0°
Max.:
270°
Increments:
90°
Setting
Description
Parameters
Deadband
Neutral zone around the
joystick's default (center)
position
Default:
10%
Min.:
10%
Max.:
50%
Summary of Contents for Multi Joystick
Page 1: ...Multi Joystick Owner s Manual mo Vis Multi Joystick for R Net...
Page 34: ...Notes 18 0 27...
Page 35: ...Notes 18 0 28...
