R-net Settings
11.0
13
CHANGING THE THROW SETTINGS
1.
Plug the R-net programming dongle into an available port in the R-net system.
2.
Power on the chair.
3.
Connect the PC to the Programming Dongle with the USB cable.
4.
Start the R-net PC Programming Software on your PC.
5.
Select
Read from Controller
to load the information from the R-net system to the Configurator
software.
6.
To change the setting for forward throw, select
Controls > Joystick > Joystick Forward Throw
.
7.
Enter the value for the parameter. (Value range is 25% to 100%, in increments of 1%)
8.
Repeat steps 6 and 7 to edit the settings for
Joystick Reverse Throw, Joystick Left Throw,
and
Joystick Right Throw,
as necessary.
9.
Select
Write to Controller
to save the changes to the R-net system.
10.
Power cycle the chair (turn it off, then back on) to load the new parameters.
Summary of Contents for Multi Joystick
Page 1: ...Multi Joystick Owner s Manual mo Vis Multi Joystick for R Net...
Page 34: ...Notes 18 0 27...
Page 35: ...Notes 18 0 28...
