P
= Rated input power
1
n
= Nº of revolutions without load
D
= Maximum disk diameter
max
M
= Spindle thread
m
= Mass
Typical noise levels in evaluation A:
A
L
= Acoustic pressure level
P
L
= Acoustic power level
WA
The noise level when working can exceed 85 dB (A).
a
= Acceleration typically evaluated in the
hw
hand/arm
Measured values ?
?
established in accordance with EN
60745.
The technical specifications set forth herein are understood within
certain tolerances (In accordance with the present
arrangements).
6.2 EC Declaration of conformity
SA21-180 / SA21-230 / SAB22-18 /
SAB22-23 / SAB24-18AL / SAB24-23AL /
AGR22-23/AGR23-18AL / AGR23-23AL
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents:
UNE EN 60745-2-11:2011, UNE EN 60745-2-3:2011,
according to EU Regulations 2006/42/CE, 2004/108/CE.
The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
That the machine:
Type:
Angle Grinder
Models:
Ramiro de la Fuente
Director General
Wear helmets hearing protection!
22
22
ENGLISH