Page 24
Instruction manual Staude MULTI-FLY – Version 07.12.2006
>
Boot Computer (so that the microfilm scanner is going to be detected in the SCSI-
menu)
>
Switch on Staude MULTI-FLY
2.6
Installation of the Twain Microfilm-Driver
Please be aware, while booting the PC, that the SCSI-ID is higher than 3. If this is not the
case there may appear conflicts with other internal SCSI-Devices. Please change the SCSI-
ID before installing the Twain-Drivers. Before changing the SCSI-ID the scanner must be
switched off. After changing the SCSI-ID the scanner must be switched on. By restarting the
Computer the Scanner must be detected by the SCSI-Detection Software.
Please be aware, that
the microfilm scanner
is initialized by the
Computer. This can
be seen in the SCSI-
menu, which will
appear on your screen
during the booting
process.
Important:
Before
changing the ID, the
Scanner must be
switched off.
2.
Installation Staude MULTI-FLY
ill.: 2.37
ill.: 2.38
