Status FV500, User Manual

Page: 29 / 52

29
4. WARRANTY
This warranty is valid for two years from the date of
purchase. Evidence of original purchase is required
for warranty services, so it is important to keep your
sales receipt.
This warranty only covers breakdown caused by
electrical or mechanical failure. It does not cover
damage caused by liquid entering the machine or
breakdown caused by failure to follow the manufac-
turers instructions.
If you have any comments or questions concerning
the functioning of the machine or warranty, please
contact us:
STATUS d.o.o. Metlika
Ulica Belokranjskega odreda 19, 8330 Metlika
e-mail: info@status.si
For more information visit our website www.status.si.
5. DECLARATION OF CONFORMITY
The machine complies with all European directives:
a.) Directive on electrical equipment designed for use
within certain voltage limits (OJ of the Republic of
Slovenia, no. 27/04)
Directive 73/23/EEC, 93/68 EEC and its
amendments
b.) Regulation on electromagnetic compatibility (OJ of
the Republic of Slovenia, no. 132/2006)
Directive 2004/108 EC and its amendments
EC declaration of conformity guarantees that the
machine is safe and has been inspected and tested to
meet all the requirements specified in the applicable
standards, directives and regulations.
EC declaration of conformity is enclosed in the User
Manual.
6. TROUBLESHOOTING
PROBLEM: WHAT TO DO:
FV500 does not
respond when I
press the buttons.
• Make sure the machine is switched on and plugged in.
• If socket is on but you have no power, check the socket with another appliance that
you know works.
• Check the power cord for any damage – cracks or splitting.
• Your machine may switch off automatically to avoid overheating. Allow it to cool down
for a few minutes and then carry on as normal. We strongly recommend you take into
account 120 seconds between each vacuum packing.
Air remains in the
bag.
• Make sure you have fully placed open end of the bag in the middle of Vacuum Com-
partment.
• Ensure that the lid of the machine is firmly pressed down to make certain a vacuum is
established. If you can open it, you didn’t press hard enough and the vacuum couldn’t
have been established. Repeat the procedure.
• Check your bag for any damage – splits, perforations or bubbles.
Test: Seal bag and submerge it in water. On the places where bag is damaged, bubbles
will appear.
• When using continuous rolls make sure that the first sealing edge is firmly sealed.