INSTALLATION
Preparing the Worktop
Cut out the work surface following the dimensions shown in the drawing below
For the purpose of installation and use, a minimum distance of 5.5cm space must be left around
the cut out. Ensure the thickness of the work surface is is at least 20mm. Use a heat resistant work
surface material to avoid deformation caused by heat from the hob. Minimum distance between
hob and cupboard should be at least 65mm.
Ensuring Adequate Ventilation
Make sure the ceramic cooker hob is well ventilated and that air inlet and outlet are not blocked.
This hob requires an adequate supply of fresh, cool air to fully function. The base of the hob must
have direct unrestricted ventilation to the room where the hob is installed.
Follow the
requirements
below.
There are ventilation holes around outside of the hob.
YOU MUST ensure these holes are not blocked by the
worktop when you put the hob into position.
