STARVILLE MH-X60th LED Spot, User Manual

Page: 33 / 68

Press [MODE ESC] repeatedly until the display shows ‘dxxx’ . Now you can set the number of
the first DMX channel to be used by the device (DMX address). Use [UP] and [DOWN] to select a
value between 1 and 512.
When the display shows the desired value, press
[ENTER] to confirm the setting and then
[MODE ESC] to proceed to the next menu item. To change the menu item without making
changes, press [MODE ESC] or wait ten seconds.
Make sure that this number matches the configuration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes
Mode Highest possible DMX address
8 channels 505
14 channels 499
DMX address
Operating
MH-X60th LED Spot
33