3. Once scanning mode is complete, the detector will enter its standard display mode.
The detector will automatically sort the signals according to signal strength, followed by
encrypted access points, according to signal strength:
Instruction Manual
4
2
3
4
5
6
7
8
1
1
2
3
4
5
6
7
8
Operating Channel
- Indicates the current operating channel of the detected
Wi-Fi signal.
Access Points detected
- The left digit indicates which detected Wi-Fi signal is
currently displayed, and the right digit indicates the total number of Wi-Fi signals
detected.
Encryption indicator
-
WEP
for WEP encryption,
WPA
for WPA encryption and
WPA2
for WPA2 encryption.
Open
indicates that the detected signal is
unencrypted.
G
indicates that the signal is an 802.11g wireless signal.
B
indicates that the
signal is an 802.11b wireless signal.
Signal Strength indicator
- Signal Strength is measured in increments ranging
from 5 (full strength) to 1 (low strength).
IN
indicates that the signal is an infrastructure mode signal,
Ad
indicates that the
signal is an Adhoc mode signal.
Battery indicator
with 3 bars indicates battery power. When displaying as
empty, please recharge the detector.
SSID Indicator
- Displays the SSID. If the SSID is too long to fit on the display,
it will scroll to indicate the complete SSID.
