14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Optional Installation
Installing the Rubber Feet
1.
Remove the
Rubber Feet
from the
Adhesive Strip
.
2.
Align each of the
Rubber Feet
on the back of the
Charging
Hub,
close to each of the four corners.
3.
Remove the adhesive backing and apply the
Rubber Feet
in
the desired positions.
Connecting a Microphone
Note:
A
Microphone
can only be connected when the
Transmitter and Receiver are set to uni-cast casting mode.
See the
section fro further informa-
tion.
1.
Connect the
Microphone Cable
to the
Microphone In Port
on the
Receiver
.
2.
Connect a
3.5 Audio Cable
to the
Microphone Out Port
on
the
Transmitter
and the other end to the
Audio Input Port
on the
Audio Device
.
