SV1110IPEXT Instruction Guide
48
Rear Panel (DCE Serial Port)
The
DTE Serial
port on the front panel can be used for serial port configuration when the
modem is connected. It requires the use of a null modem serial cable.
The
DCE Serial
port on the rear panel is used to connect the modem to the
SV1110IPEXT and requires the use of a straight through serial cable.
Place the modem near the SV1110IPEXT and an available telephone jack. Connect the
modem to the telephone jack, data cable, and power source according to the instructions
in its documentation. The opposite end of the modem’s data cable should be a DB9
female serial connection. Connect that end of the cable to the
DCE Serial
connection on
the rear panel of the SV1110IPEXT.
Configuring a Modem Connection on the SV1110IPEXT
Most connections will work appropriately with the default settings on the SV1110IPEXT
once the feature is enabled. When you entered the Unlock code to enable the feature, the
SV1110IPEXT created a new menu option to enable configuration of this feature.
Login to the Web interface as
Admin
. Click
Admin/Setup
from the top of the page and
choose
Modem (PPP) setup
.
