manualshive.com logo in svg

StarTech.com SV1110IPEXT, Instruction Manual

Share
Download
StarTech.com SV1110IPEXT Instruction Manual Download Page 44

SV1110IPEXT Instruction Guide

40

Activating the IPMI Option

A system without the IPMI option enabled

The SV1110IPEXT contains the necessary software to use IPMI.  To enable this
capability, you must purchase the software option from StarTech.com unless you have
purchased a model with the feature pre-enabled.  To verify whether the IPMI feature is
enabled on your unit, login to the Web interface as 

Admin

, click the 

Setup/Admin

button at the top of the page, and click 

Firmware and flash memory management

.  If

IPMI

 is not listed beside 

Software Options

 (see above) then the IPMI option is not

present and you will have to purchase the software option to use the feature.

To purchase the IPMI option, contact StarTech.com Technical Support:

USA/Canada:

 1-800-265-1844

UK/Ireland/Europe:

 00-800-7827-8324

Rest of the World:

 +1-519-455-9675

Have your model and serial number on hand.  When asked, supply the technician with the
code listed under 

Purchase Options

 at the bottom of the 

Firmware and flash memory

management

 page.  Once the order is processed, the technician will provide you with an

Unlock code.  Enter that code in the space provided, and click 

Submit

.  The system will

update itself to allow IPMI configuration.

Summary of Contents for SV1110IPEXT





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands