StarTech.com SECTBLTPOS Instruction Manual Download Page 14

Instruction manual

12

Technical support

StarTech.com’s lifetime technical support is an integral part of our commitment to 

provide industry-leading solutions.  If you ever need help with your product, visit 

www.startech.com/support

 and access our comprehensive selection of online tools, 

documentation, and downloads.
For the latest drivers/software, please visit 

www.startech.com/downloads

Warranty information

This product is backed by a five-year warranty. 
StarTech.com warrants its products against defects in materials and workmanship 

for the periods noted, following the initial date of purchase. During this period, 

the products may be returned for repair, or replacement with equivalent 

products at our discretion. The warranty covers parts and labor costs only. 

 

StarTech.com does not warrant its products from defects or damages arising from 

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their 

officers, directors, employees or agents) for any damages (whether direct or indirect, 

special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, 

or any pecuniary loss, arising out of or related to the use of the product exceed the 

actual price paid for the product.  Some states do not allow the exclusion or limitation 

of incidental or consequential damages. If such laws apply, the limitations or exclusions 

contained in this statement may not apply to you.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other 

protected names and/or symbols of third-party companies not related in any way to  

StarTech.com.  Where they occur these references are for illustrative purposes only and do not 

represent an endorsement of a product or service by StarTech.com, or an endorsement of the 

product(s) to which this manual applies by the third-party company in question.  Regardless 

of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby 

acknowledges that all trademarks, registered trademarks, service marks, and other protected 

names and/or symbols contained in this manual and related documents are the property of 

their respective holders.

Summary of Contents for SECTBLTPOS
















Reviews: