Instruction manual
10
12
figure 13
13
figure 12
13
12
1
14
1
Set up the iPad enclosure on a table or desk
Remove the backing from the four 12.7x2 mm rubber pads (
11
) and affix the pads to
the bottom of the mounting bracket (
1
) (
figure 14
).
figure 14
11
1
1. Line up the holes on the mounting bracket with the four holes on the back of the
rear plate (
3
).
2. Use the four M4x8 mm hex screws (
8
) and the 2.5 mm Allen key (
9
) to attach the
mounting bracket to the rear plate.
3. Place the SECTBLTPOS on the top of a table or desk.
