26
Setup: TCP/IP
Obtain TCP/IP settings automatically (use DHCP/BOOTP)
: This option allows you to
select how IP information is assigned to your print server. If there is a DHCP/BOOTP
server on your network, you can choose “Obtain TCP/IP settings Automatically” and the
printer server will automatically be assigned IP information from the DHCP server.
Use the following TCP/IP settings
: This option allows you to enter specific IP
information. If you choose “Use the following...”, you will have to enter the proper
information in following fields:
IP Address
: Enter an IP address for the print server. The IP address must meet the IP
addressing requirements of the network segment.
Subnet Mask
: Enter a subnet mask for the print server. The address must meet the
addressing requirements of the network segment.
Gateway
: Enter a gateway IP address for the print server.
Summary of Contents for PM1110P
Page 54: ...Revised December 23 2003...
