Instruction manual
9
Attach the keyboard tray to the mounting pillar
1. Affix the small pressure pads (
8
) onto the reverse side of the keyboard tray (
2
) in the
areas indicated in the diagram.
2. Use the M4*55 Allen wrench (
12
) to insert two M6*8 screws (
13
) into the top two
holes on the keyboard tray and then the mounting pillar (
7
).
3. Turn the Allen wrench clockwise to tighten the screws.
Warning!
Do not over-tighten the screws. (tightening torque is 1.5 Nm)
2
8
12
13
7
