Startco Engineering Ltd.
Page 9
SE-704 Earth-Leakage Monitor
Rev. 0
Pub. SE-704-M, January 18, 2008.
5. T
ECHNICAL
S
PECIFICATIONS
Supply:
0U
Option..............................2.5
VA,
120 to 240 Vac,
(+20, -55%) 50/60 Hz,
2.0 W, 100 to 240 Vdc,
(+20, -25%)
0D Option..............................2.0 W, 12 to 30 Vdc,
(+20, -25%)
0T Option ..............................2.0 W, 40 to 55 Vdc,
(+20, -25%)
03 Option...............................2.5 VA, 24 Vac,
(+15%, -40%), 50/60 Hz
Trip-Level Settings.......................10, 30, 60, 80, 100, 150,
200, 300, 400, and
500
mA
Trip-Time Settings........................30, 55, 100, 200, 300,
400, 500, 600, 800, and
1,000 ms
Accuracies:
(1, 2)
Trip Level:
(3, 4)
> 60 mA................................+ 0, -10%
= 60 mA................................+ 0, -10 mA
= 30 mA................................+ 0, -6 mA
= 10 mA................................2 mA
Trip
Time
(5)
..............................10 ms
Input:
Algorithms...............................DFT Digital or Peak
DFT 3 dB Frequency Resp ...32 to 86 Hz
Peak 3 dB Frequency Resp ...20 to 420 Hz
CT .............................................SE-CS30 Current Sensor
CT
Detection........................Open-Circuit Detection
Thermal
Withstand:
Continuous ...........................25 A Earth-Fault
Current
1-Second...............................400 A Earth-Fault
Current
Analog Output:
Range.......................................0 to 5 Vdc, 10 mV per mA
Output
Impedance...................220
Ω
Reset..............................................Front-Panel Switch and
Remote
N.O.
Contact
Functional Test ............................ Front-Panel Switch
Output Relay:
Contact
Configuration ........... Isolated N.O. and N.C.
Operating Mode ..................... Fail-Safe or Non-Fail-Safe
CSA/UL Rating ..................... 8 A Resistive, 250 Vac,
8 A Resistive, 30 Vdc
Supplemental Contact Ratings:
Make/Carry 0.2 s .............. 20 A
Carry Continuous.............. 8 A
Break:
dc.................................. 30
W
Resistive,
15 W Inductive
(L/R
=
0.04)
ac.................................. 2,000
VA
Resistive
1,400
VA
Inductive
(PF
=
0.4)
Subject to maximums of 8 A and 250 V (ac or dc).
Operating Mode........................... Latching or Autoreset
Terminals ..................................... Wire Clamping,
24 to 12 AWG
(0.2 to 2.5 mm
2
) conductors
Dimensions:
Height ..................................75 mm (3.0")
Width...................................55 mm (2.2")
Depth ...................................115 mm (4.5")
Shipping Weight.........................0.45 kg (1 lb.)
Environment:
Operating Temperature....... -40°C to 60°C
Storage Temperature........... -55°C to 80°C
Humidity.............................. 85%
Non-Condensing
Surge Withstand ...................... ANSI/IEEE 37.90.1-1989
(Oscillatory and Fast
Transient)
EMC Tests:
Verification tested in accordance with EN 50263:2000
Electrostatic
Discharge......IEC
61000-4-2, EN 61000-4-2,
6 kV Contact Discharge
8 kV Air Discharge
Radiated
RF.......................IEC
61000-4-3, EN 61000-4-3
10 V/m, 80-1000 MHz,
80% AM (1 kHz)
10 V/m, 900 MHz,
200 Hz Pulse Modulated
