8 PKG08812-QRGDFC
ENGLISH
KEYPAD AND NAVIGATION
The DFC keypad is multi-functional. There are four keys.
ON/OFF/MENU KEY
This key is used to power the gage on/off. Press to
power the gage on. Press and hold for 3 seconds to
power the gage off.
This key is also used to access the Setup Menu. When
the gage is powered ON, press to access the Setup Menu.
This key is also used to navigate UP when in the
Setup Menu.
p
ZERO KEY
This key is used to zero the displayed values. Press
to zero load and if connected to the FMM digital force
tester, zero distance.
This key is also used to navigate DOWN when in the
Setup Menu.
q
SOFTKEY 1
This is the left arrow key. It is used to move out of a
setup when in the Setup Menu.
t
This key may also be mapped to a specific function.
The Setup Menu has a Key setup function where you
may assign how Softkey 1 performs. For example, you
can assign a SAVE function to the key. When pressed,
the measured values are "saved" to memory.
SOFTKEY 2
This is the right arrow key. It is used to move in to a
setup when in the Setup Menu.
u
Like the Softkey 1, it also may be mapped to a specific
function. For example, you can assign a MODE
function to the key. Pressing the key can change the
operating modes of the gage. You can switch from
Real Time to Peak Tension by pressing Softkey 2.
DISPLAY LAYOUT
The force gage features a high-resolution OLED color
display with adjustable backlight. The backlight may
be adjusted from a setting in the Main Menu.
The DFC features a primary and secondary
display window.
DISPLAY TYPES
PRIMARY DISPLAY
SECONDARY DISPLAY
Real Time
Peak Measurement
Peak Tension
Real Time Measurement
Peak Compression
Real Time Measurement
Average
Peak Measurement Preload to
Start Average
Average (Functional Capacity) Peak Measurement Time Duration
Static COF
Kinetic COF
Kinetic COF
Static COF
