14 - GB
Original operatin instructions in German
English
Safety advice ( English )
The vacuum device is designed for industrial use. Ideal in combination with an electric tool, on building sites, in work-
shops, etc.
Safety advice ( English )
●
Keep packaging material such as plastic bags away from children.
▶
Never stand or sit upon the vacuum device.
▶
Particular caution is advised when ascending stairs. Pay attention to standing safely.
▶
Do not pull the suction hose and connection line over sharp edges, kink it or shut it.
▶
Always lay the suction hose and connection line so that nobody may trip over them.
▶
In case of any leakage of foam or liquid, immediately switch off the vacuum device.
▶
Always keep dry the inside of the lid.
▶
Do not start the vacuum device including its accessories if:
●
the vacuum device shows detectable damage (issures/cracks);
●
the power connection line is defective or shows issuring or ageing; or
●
any invisible defect is suspected (after a fall).
▶
Do not allow the rotating brushes to get into contact with the power connection line.
▶
Do not operate the vacuum device where there is danger of explosions.
▶
Keep away the vacuum device from inlammable gases and substances.
▶
Do not aspirate any combustible or explosive solvents, materials soaked in solvents, explosive dusts, liquids such as
petrol, oil, alcohol, diluents or materials hotter then 60 °C (140 °F).
▷
Otherwise there will be danger of ire and explosions!
▶
Use the socket of the vacuum device only for the purposes deined in the instruction manual.
▶
In case of any inappropriate usage, improper operation or repair, the producer shall be exempt from liability.
▶
Do not use any damaged extension lines.
▶
If the connector line of the vacuum device has been damaged, it must be replaced with a special connector line which
is available from the producer or their service.
▶
Electric brushes: Do not allow the rotating brushes to get into contact with the power connection line.
▶
The voltage on the type sign must correspond to the grid voltage.
▶
After every use and before any maintenance, switch off the vacuum device and pull the power plug.
▶
Pull on the plug only, not on the line.
▶
Never plug or pull the power plug with wet hands.
▶
The socket must be secured via a household fuse with a suitable current rating.
▶
Never open the vacuum device outdoors in rain or storm.
▶
Have repairs been made only by experts, e. g. the producer’s service. Use original spare parts only.
▶
Improperly repaired devices pose a hazard for the user.
Summary of Contents for AS 12 Series
