Starline i96can, User Manual

Page: 10 / 24

StarLine i96
can
10
Operation description
•
Security mode
• Factory security system control
•
Engine blocking
•
Service mode
• «Emergency disarm» mode
•
«Device registration» mode
•
«Programming» mode
To drive a car, equipped with the immobilizer, you must carry along the
tag for authorization. After the tag appears in the main unit’s operational
range, automatic data exchange via the encrypted Bluetooth Smart
protocol takes place. Also a smartphone with BLE 4.2 and above can be
registered as a tag.
Security mode
The owner is authorized at ignition switch-on. The authorization
method can be a tag and (or) entry of the code by means of the factory
car buttons.
Authorization by factory car buttons can be used in the following cases:
• for security deactivation in the tag absence. In this case, authorization
by PIN-code entry shall be set as an alternative;
• for theft protection in case of tag theft or tag loss. In this case,
authorization by PIN-code entry shall be set as the mandatory one.
Authorization by means of the tag is set by default.
Authorization by means of the tag
If tag is detected, the immobilizer turns to the «Disarm» mode. Successful