2/19/2020
Starline CDe240 Operator Manual
10
Operator Use Guide
START
•
Turn on at wall.
•
Pre Wash Zone:
Fit Drain Upstand (6).
Fit Scrap Trays (4) and (5).
•
Wash Zone:
Fit Wash Pump Inlet Filter (3).
Fit Drain Upstand (2) .
Fit Scrap Trays (1).
•
Rinse Zone:
Fit Rinse Pump Filter (9) .
Fit Drain Upstand (8).
Fit Scrap Trays (7).
•
Shut all doors and turn wall and Machine Power on.
•
Machine begins filling. Full light amber when tanks are full.
•
Ready light glows amber when the machine is up to required temperature.
OPERATION
•
Press Start button to operate machine.
•
Cycle light glows green while machine operates.
•
Stack one rack with items. Push the rack fully onto the sideload table of the machine.
Ensure that the rack remains parallel to the back of the sideload table.
•
Repeat for all consecutive racks
•
For quicker washing, press Fast button to toggle faster washing speed.
NOTE: Pumps and conveyor will stop operating if the machine is left idle for 2 minutes. To
restart the pump and conveyor simply feed a new rack into the inlet of the machine.
SHUT DOWN – END OF EACH DAY
•
Press Stop button
•
Take out Drain Upstands (2, 6 & 8) to gravity drain the machine.
•
When tanks are visibly empty switch Power button off.
•
Proceed with Operator Care Wash Zone and Rinse Zone cleaning instructions.
SUGGESTED BEST PRACTICE
Pre-rinse
Scrape and/or rinse trays, plates & glasses in cool water
Chemical
Use a good quality non foaming commercial detergent and drying agent – do
not use domestic detergents which will cause the wash tank to foam
