Starke EcoMaxx ECO-FD 18 Operation Manual Download Page 45 | Manualshive

Page: 45 / 48

background image

39

33.

Observe Floor Loading Limits

Never assume that any surface over which your forklift truck is to operate is strong enough to support the weight with or without a load. Make sure the dock
boards are securely fastened and are strong enough to take this moving load safety.

34.

Have Brakes Set And Wheel Blocks In Place While Loading And Unloading

When working on a loading dock. Make sure that the brakes of the trucks or trailers are set to prevent movement when you drive on. If a truck should roll
forward, a serious accident could happen.

35.

Always Drive With the Load Uphill On a Ramp

Travel forward going up and in reverse coming down to keep the load from falling off. Don't descend with the load in front. Always go up and down grades
slowly.

36.

Use an Assistant When Going Up or Down a Ramp with a Bulky Load

When driving forward up a ramp with a load so big you can't see ahead I get someone to guide you and make sure the way is clear.

37.

Don't Use Your Forklift Truck to Lift Personnel

This is extremely dangerous. Your forklift truck was designed for smooth, safe handling of things - not for elevating people.

38.

Don't Carry Passengers

Again, don't use your forklift truck for moving loads for which it was not designed. There is NO safe place on a forklift truck for a passenger to ride.

39.

Shut Off Your Forklift Truck When Leaving It Unattended

«
...
43
44
45
46
47
...
»

Summary of Contents for EcoMaxx ECO-FD 18

















































Reviews:

No comments

Related manuals for EcoMaxx ECO-FD 18

Brand: HanseLifter Pages: 235

LOGIFLEX SELFR 1001/1600

Brand: logitrans Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands